MS-1250 Water-soluble Interlining For Shirts Kara Doll

MS-1250

Water-soluble Interlining For Shirts

ApparelX ID:1076792

non fusible interlining 1250 is temporarily fusible interlining areas carrying the complete water-soluble adhesive resin that is soluble in water. When washing or washing the product, the resin will run off and become a non fusible interlining. To become a similar handling and fusible interlining areas, and support the sewing.

Maker:Kara Doll

Supplier:

E

CO

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

1

OW

12

Bleach

51

CG

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

non fusible interlining 1250 is temporarily fusible interlining areas carrying the complete water-soluble adhesive resin that is soluble in water. When washing or washing the product, the resin will run off and become a non fusible interlining. To become a similar handling and fusible interlining areas, and support the sewing.

Press conditions ・ Flat type

temperature	140 ~ 150 ℃
time	12 to 15 seconds
pressure	2.45 ~ 3.43 x 10-²MPa

・ Roller type

temperature	140 ℃ ～ 150 ℃
time	12 to 15 seconds
pressure	0.245 ~ 0.343MPa

* Press conditions vary depending on the press model, so it is recommended to try and paste each time.

Bath ratio of water-soluble resin dissolution "1:30" (33L of water is required for 1kg of product. Also, be sure to rinse.

Category	Interlining
Subcategory	Shirt Interlining
Gender	Mens
Use Applications	Shirt Collar / Cufflinks
Material	Polyester / Cotton
Organization	Taffeta
Color Pattern	No Pattern
Style	SHIRT


Specification	90cm x 60m
Material	65% polyester 35% cotton E CO
Handling	Bath ratio of water-soluble resin dissolution "1:30" (33L of water is required for 1kg of product. Also, be sure to rinse.
Maker	Kara Doll

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.

MS-1250 Water-soluble Interlining For Shirts

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Item Description

FAQ

General Notes

Reviews

Related Items

Items checked by persons who checked this item

Items from the same category

Items from the same maker

MS-1250

Water-soluble Interlining For Shirts