ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

CCR03BWAX(M) Cotton Wax Cord 4.2MM[Ribbons, Tapes, And Cords] Cordon

CCR03BWAX(M)

Cotton Wax Cord 4.2MM

ApparelX ID:1110784

* This product is made to order. For 4H or less, a small-lot production fee applies.

An orthodox cotton wax cord available in 51 color variations. It is a hard type with more firmness than conventional products.
Also, the "wound order" for this product is 1 unit = 200m (50m hank × 4roll). Please note.

Brand / Manufacturer:Cordon

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

Hank

Color

Please select a color:

01C

Bleached White

02C

03C

04C

05C

06C

07C

08C

09C

10C

11C

12C

13C

14C

15C

16C

17C

18C

19C

20C

21C

22C

23C

24C

25C

26C

27C

28C

29C

30C

31C

32C

33C

34C

35C

36C

37C

38C

39C

40C

41C

42C

43C

44C

45C

46C

47C

48C

49C

50C

Black

51C

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

* This product is made to order. For 4H or less, a small-lot production fee applies.

Cuts are available up to 5 m, and a small lot processing fee (@500) will be charged. Orders over 5 m must be placed from 50 m (1 hank), and orders under 4 hanks (200 m) will incur a small lot production fee (@5000). *Due to the processing steps, the finished meterage may vary by up to 5% for each lot. Please purchase all extra length produced. Thank you for your understanding.
*The thickness sample uses C/#36C, and the color sample uses CCFO1A WAX (S).
*For the hard type, only a sample of 36C is available.

Category	Ribbons, Tapes, And Cords
Subcategory	Round Drawstring
Gender	Unisex
Application	General Purpose
Structure	Cord
Tag	Made-to-order Item


Specification	Lot: 200M Put-up: 50M hank winding Diameter: approx. 4.2mm
Material	100% cotton CO
Handling	* Please note that color, thickness, width, and texture may vary slightly depending on the production lot. * As no preservatives are used, mold may develop. Please take care when storing. * Since the low-wax finish is hand-processed, there may be slight variations in wax depth, diameter, and thickness.
Brand / Manufacturer	Cordon

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.