ApparelX is B2B e-commerce site for the apparel industry.

CCF01A(3L) コットンコード 11.5MM[Ribbon Tape Cord] Cordon

CCF01A(3L)

コットンコード 11.5MM

ApparelX ID:1110779

51色展開のコットン100%コードです。

Maker:Cordon

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Unit

* You can select a unit:

Color

Please select a color:

01C

02C

03C

04C

05C

06C

07C

08C

09C

10C

11C

12C

13C

14C

15C

16C

17C

18C

19C

20C

21C

22C

23C

24C

25C

26C

27C

28C

29C

30C

31C

32C

33C

34C

35C

36C

37C

38C

39C

40C

41C

42C

43C

44C

45C

46C

47C

48C

49C

50C

51C

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

51色展開のコットン100%コードです。

※太さ見本は、C/#12C、色見本はCCF01A（S）を使用しています

Category	Ribbon Tape Cord
Subcategory	Flat String
Gender	Unisex
Use Applications	General Purpose
Organization	Cord
Tag	NEW


Specification	ロット・仕立て：50Mカセ巻幅：約11.5mm
Material	コットン100% CO
Handling	製造ロットにより多少色目、太さ、風合いが異なりますので予めご了承ください。
Maker	Cordon

Share This Item

FAQ

Regarding this item, there are the following FAQ:

I purchased a cord, but the thickness of the cord is different even though it is the same size. Is this a faulty product?

Twisted string is made by simply twisting bundles of thread together, so the thickness is not uniform. When cut, the string will generally spread out little by little, so the thickness may differ between the regular roll and the sample.
Please note that the sizes shown are not approximate.

There are black spots on the unbleached cotton, but is it dirty?

It is a specification because it becomes a cotton residue peculiar to cotton

Is it possible to specify an oblique cut for the heat cut?

Diagonal cuts are also possible, but as this is done by hand, there may be a slight deviation of a few degrees.
When ordering, please specify an angle such as 45°.

Is it possible to add tassel to the cord ?

tassel processing is possible with strings. You can simply untie it, or you can attach another thin string to the end of the string. Since it will be hand-made, it will be a separate estimate. For details, please contact us from the support page .

<necessary information>
・Product number ・Image image or image that shows the length of handwriting ・Planned quantity

What materials can be heat cut?

Heat cutting is possible for synthetic fibers (polyester, nylon, acrylic, polypropylene), etc.
Natural fibers (cotton, linen, silk, etc.) can burn or burn, so they cannot be cut with heat, and can only be cut with scissors.
Please note that thick twisted cord may not harden well even if they are synthetic fibers.

Is logo printing possible?

You can print on the material.
For details, please contact us from here .

What do the widths of 7x7mm and 9x9mm mean for binder tapes and knit tapes?

The one with this width has a groove in the center and is used by sandwiching the textile.
In the case of 7 x 7 mm, it will be 7 mm when folded in half.

Is it possible to have the tapes and cord cut to the specified length one by one?

Is possible. Please select scissors cut or heat cut from the options on each product page and enter the quantity.
At that time, please write down the desired length in a memo.
During the cut, for sure it is Kattorosu occurs, there is a case when the number of cut often is not completely removed from the roll to receive your order.
In that case, we will contact you than order the person in charge to check whether to add a TorikiRika or quantity, from the roll receive the order.