ApparelX is a global B2B marketplace for fabrics and apparel materials.

FK-W3000 Shape-retaining Wire 0.7MM[Ribbons, Tapes, And Cords] Cordon

FK-W3000

Shape-retaining Wire 0.7MM

ApparelX ID:1107107

A shape-retaining plastic wire that can be bent freely.
It is lightweight and does not rust or deteriorate, so it can also be used as a substitute for metal wire.
Made of a soft plastic material, it offers excellent safety and reduces the risk of injury.
Recommended as a core material for mask nose fits, stuffed toy skeletons, hat brims, ruffles, and other DIY materials.

Brand / Manufacturer:Cordon

Supplier:

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Category	Ribbons, Tapes, And Cords
Subcategory	Cord
Gender	Unisex
Application	General Purpose
Structure	Cord


Specification	Lot / packaging: 100 m bobbin-wound Diameter: approx. 0.7 mm
Material	100% polyethylene PE
Handling	Please note that the color tone, thickness, and texture may vary slightly depending on the production lot. As this is made of polyethylene, the heat resistance temperature is approximately 80°C. Shape retention performance may weaken with prolonged use. Although heat-setting has been applied, it may shrink depending on the conditions, so please test before use.
Brand / Manufacturer	Cordon

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.

FK-W3000 Shape-retaining Wire 0.7MM

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

FK-W3000

Shape-retaining Wire 0.7MM