ApparelX is B2B e-commerce site for all persons in the apparel industry. There is a wide range of fabrics, buttons, lining, interlining, zippers, parts and more.

PULA30 Pull Tab With Core 3mm[Ribbon Tape Cord] Cordon

PULA30

Pull Tab With Core 3mm

ApparelX ID:1103361

There are no reviews yet.

This is a polyester cord with a core that is the perfect size for zipper pulls.

Maker:Cordon

Supplier:Okura Shoji Co., Ltd.

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

** This item should be ordered 4M or Under, 1M in increments.

Inquiry About This Item

Unit

* You can select a unit:

Meter

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

This is a polyester cord with a core that is the perfect size for zipper pulls.

Category	Ribbon Tape Cord
Subcategory	Round Cord
Gender	Unisex
Use Applications	General Purpose
Material	Polyester
Organization	Cord


Specification	Lot/Size: 50M Skein Length: Approx. 3mm
Material	100% polyester E
Handling	Please note that the color, thickness, and texture may vary slightly depending on the production lot.
Maker	Cordon
Registrated Date	30/07/2025

Share This Item

FAQ

Regarding this item, there are the following FAQ:

I purchased a cord, but the thickness of the cord is different even though it is the same size. Is this a faulty product?

Twisted string is made by simply twisting bundles of thread together, so the thickness is not uniform. When cut, the string will generally spread out little by little, so the thickness may differ between the regular roll and the sample.
Please note that the sizes shown are not approximate.

Is it possible to specify an oblique cut for the heat cut?

Diagonal cuts are also possible, but as this is done by hand, there may be a slight deviation of a few degrees.
When ordering, please specify an angle such as 45°.

Is it possible to add tassel to the cord ?

tassel processing is possible with strings. You can simply untie it, or you can attach another thin string to the end of the string. Since it will be hand-made, it will be a separate estimate. For details, please contact us from the support page .

<necessary information>
・Product number ・Image image or image that shows the length of handwriting ・Planned quantity

What materials can be heat cut?

Heat cutting is possible for synthetic fibers (polyester, nylon, acrylic, polypropylene), etc.
Natural fibers (cotton, linen, silk, etc.) can burn or burn, so they cannot be cut with heat, and can only be cut with scissors.
Please note that thick twisted cord may not harden well even if they are synthetic fibers.

Is logo printing possible?

You can print on the material.
For details, please contact us from here .

What do the widths of 7x7mm and 9x9mm mean for binder tapes and knit tapes?

The one with this width has a groove in the center and is used by sandwiching the textile.
In the case of 7 x 7 mm, it will be 7 mm when folded in half.

Is it possible to have the tapes and cord cut to the specified length one by one?

Is possible. Please select scissors cut or heat cut from the options on each product page and enter the quantity.
At that time, please write down the desired length in a memo.
During the cut, for sure it is Kattorosu occurs, there is a case when the number of cut often is not completely removed from the roll to receive your order.
In that case, we will contact you than order the person in charge to check whether to add a TorikiRika or quantity, from the roll receive the order.