ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. We ship to the UK: DHL delivers in 2–5 days after dispatch.Delivery information

›
TM-4250-ST

TM-4250-ST Regular Heat-Seal Type Straight Reflective Tape[Ribbons, Tapes, And Cords] Topman Kogyo

TM-4250-ST

Regular Heat-Seal Type Straight Reflective Tape

ApparelX ID:1098124

This straight tape can be used for uniforms, vests, and sportswear.
Because it has a retroreflective function, it is ideal for clothing used outdoors.

This item can be ordered by the roll. (1 roll = 25M random length)

Set the roll quantity

Because the product is a 25M random-length roll, if the number of meters is less, we will refund the amount for that quantity. If it is more, we will charge the amount for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:Topman Kogyo

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

10MM

11MM

12MM

13MM

14MM

15MM

16MM

17MM

18MM

19MM

20MM

21MM

22MM

23MM

24MM

25MM

26MM

27MM

28MM

29MM

30MM

31MM

32MM

33MM

34MM

35MM

36MM

37MM

38MM

39MM

40MM

45MM

50MM

55MM

60MM

65MM

70MM

80MM

90MM

100MM

Color

Please select a color:

4255

Silver

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Set the roll quantity

1) Peel off the film from the back side (adhesive side).
1) Press machine standard settings. (Temperature setting: 140°C to 160°C, pressure: 0.3kgf/cm3, time: 10 to 20 seconds)
3) Press while leaving the PET film on the surface attached.
4) After cooling, peel off the PET film on the surface.
5) To further increase peel strength, repress as needed. (Temperature setting: 120°C to 140°C, pressure: 0.2kgf/cm3, time: 10 seconds)

The size shown is for the folded state.

※This is a straight-processed product.

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Application	General Purpose
Style	SPORT, UNIFORM, OUTER


Specification	Specification: 25m random/R
Material	100% urethane adhesive
Handling	Note 1) To ensure that temperature and pressure are applied evenly, press while keeping the material flat. Note 2) Please sufficiently adjust the setting conditions depending on the material to be pressed. (No-claim condition) Note 3) When fusing to specially finished textile, please sufficiently check the adhesion strength. (No-claim condition) Note 4) The standard settings for the press machine are general conditions, so please carry out sufficient test processing with the actual production materials.
Brand / Manufacturer	Topman Kogyo

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.