ApparelX is B2B e-commerce site for the apparel industry.

M-1720-WT

M-1720 Microprism Roll Shooting Welded Tape (Circular Interlock Knitting)

ApparelX ID:1097539

Regarding delivery dates

For bulk orders, production is made to order, so delivery will take 2 to 3 months.

Regarding lots

Sample cuts are available in 50mm width only, up to 5m. For other sizes, please contact support .

The product comes in 60m random. If the actual length is less than the stated length, we will refund the difference. If the actual length is more than the stated length, we will charge you for the difference. In that case, we will contact you separately.

This product has been welded.
Designed for outdoor use, the smooth, flat surface covered with a roll-emitting layer allows even light sources refracted by water to emit roll rays, even when exposed to moisture such as rain.
This product can be ordered in roll units. (1 roll = random 60 meters)
Sample cuts available only in 50mm width, up to 5m. Lot sizes: 15mm width 1680m (28 rolls), 25mm width 960m (16 rolls), 35mm width 720m (12 rolls), 70mm width 360m (6 rolls)

Set the quantity of rolls.

Maker:STAR BRAND (Hoshika)

Supplier:

PVC

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

15MM

25MM

35MM

50MM

70MM

Color

Please select a color:

White

Fluorescent Lime Yellow

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

Regarding delivery dates

For bulk orders, production is made to order, so delivery will take 2 to 3 months.

Regarding lots

Sample cuts are available in 50mm width only, up to 5m. For other sizes, please contact support .

Set the quantity of rolls.

*Fluorescent colors may transfer color if left in direct contact with other materials.
*Even with standard colors, there is a possibility of color transfer from the material depending on the combination.
*Please be careful when combining with other auxiliary materials.
*The sheet surface has mold lines spaced approximately 230 mm apart in the direction of the roll.
*Dry cleaning, interior washing, and ironing are not permitted.

Category	Ribbon Tape Cord
Subcategory	Tape
Gender	Unisex
Style	FUNCTIONAL, OUTDOOR, UNIFORM, OUTER


Country of Origin	United States
Specification	1roll: 60m estimated Roll Radiance: C/#1 200cd/lux/m2 C/#2 145cd/lux/m2 (These are typical values for observation angle 0.2° and incidence angle +5°, and are not guaranteed values.)
Material	Soft vinyl chloride 100% PVC
Maker	STAR BRAND (Hoshika)

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Is it possible to specify an oblique cut for the heat cut?

Diagonal cuts are also possible, but as this is done by hand, there may be a slight deviation of a few degrees.
When ordering, please specify an angle such as 45°.

Is it possible to add tassel to the cord ?

tassel processing is possible with strings. You can simply untie it, or you can attach another thin string to the end of the string. Since it will be hand-made, it will be a separate estimate. For details, please contact us from the support page .

<necessary information>
・Product number ・Image image or image that shows the length of handwriting ・Planned quantity

What materials can be heat cut?

Heat cutting is possible for synthetic fibers (polyester, nylon, acrylic, polypropylene), etc.
Natural fibers (cotton, linen, silk, etc.) can burn or burn, so they cannot be cut with heat, and can only be cut with scissors.
Please note that thick twisted cord may not harden well even if they are synthetic fibers.

Is logo printing possible?

You can print on the material.
For details, please contact us from here .

What do the widths of 7x7mm and 9x9mm mean for binder tapes and knit tapes?

The one with this width has a groove in the center and is used by sandwiching the textile.
In the case of 7 x 7 mm, it will be 7 mm when folded in half.

Is it possible to have the tapes and cord cut to the specified length one by one?

Is possible. Please select scissors cut or heat cut from the options on each product page and enter the quantity.
At that time, please write down the desired length in a memo.
During the cut, for sure it is Kattorosu occurs, there is a case when the number of cut often is not completely removed from the roll to receive your order.
In that case, we will contact you than order the person in charge to check whether to add a TorikiRika or quantity, from the roll receive the order.