ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

›
M-8000-ST-1

M-8000-ST-1

M-8000 Flame-Retardant Reflective ST-1 (Four-Fold Stitch)

Name: M-8000 Flame-Retardant Reflective ST-1 (Four-Fold Stitch)
Brand: STAR BRAND (Hoshika)
SKU: 1097201

ApparelX ID:1097201

This product has a four-fold stitch finish. Please refer to the image.
The base fabric uses flame-retardant woven fabric, making this a reflective material mainly used for high-visibility safety clothing.
It can be used for general firefighter uniform designs based on European standard EN496, and for uniforms and other items that require high reflectivity.

This product can be ordered by the roll. (1 roll = 23M estimated)

Set roll quantity

Since the product is supplied in a 23M random roll, if the length is less than the ordered amount, we will refund the difference. If it is more, we will charge for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:STAR BRAND (Hoshika)

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

6MM

7MM

8MM

10MM

15MM

Color

Please select a color:

Lime Yellow

Silver

Red Orange

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

STARBRAND-SAMPLE1

STAR BRAND Sample Card

Product Description

Set roll quantity

*Although M-8000 is flame-retardant material, the core and thread for custom printing are not made of flame-retardant material.

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Style	FUNCTIONAL, OUTDOOR, UNIFORM, OUTER


Country of Origin	Japan
Specification	1 roll: 23m estimated Reflective luminance: [C/#5] 583cd/lux/m2 [C/#2・11] 88cd/lux/m2 (Representative values at observation angle 0.2° and incident angle +5°, not guaranteed values.)
Material	Base fabric: 55% cotton, 45% flame-retardant acrylic Surface: glass beads CO MA
Brand / Manufacturer	STAR BRAND (Hoshika)

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.