ApparelX is a global B2B marketplace for fabrics and apparel materials.

A-QB

Asahi Quilt Bias

ApparelX ID:1088953

This product is sold as a set of 6 rolls.

This is a bias tape that can be easily temporarily bonded with an iron or hot press.

Brand / Manufacturer:Asahi Bias (Watanabe Fukuhaku Kogyo)

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

SET

Size

Please select a size:

6MM

12MM

Color

Please select a color:

1101

1106

1107

1108

1109

1110

1113

1115

1118

1124

1125

1126

1127

1128

1129

1132

1134

1137

1141

1142

1144

1145

1147

1151

1153

1154

1155

1156

1157

1158

1161

1162

1163

1165

1166

1170

1171

1172

1179

1180

1181

1182

1185

1188

1190

1193

1194

1195

1196

1199

1201

1202

1206

1207

1211

1212

1214

1216

1217

1218

1219

1221

1223

1224

1226

1228

Black

1301

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

This product is sold as a set of 6 rolls.

This is a bias tape that can be easily temporarily bonded with an iron or hot press.

How to use
1. Place the adhesive side of the tape facing down and press with an iron to temporarily secure it.
2. After tacking is finished, hem both ends of the tape.

Category	Ribbons, Tapes, And Cords
Subcategory	Bias Tape
Gender	Unisex
Style	JACKET, KNIT, SHIRT, SKIRT


Specification	1 roll: 10 m
Material	Cotton 100%
Brand / Manufacturer	Asahi Bias (Watanabe Fukuhaku Kogyo)

Share This Item

FAQ

Frequently asked questions about this product:

Can you do piping or core-type processing?

It will be a custom-made item, but processing is available from one roll.
Contact us.

Is the size of the bias tape the finished width?

Yes, this is the finished width of the bias tape, so please select the width you want.

Please tell me the difference between processing types such as double fold and two-fold.

The processing type is shown on part of the product image, so please check there.

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.