KH-HB Top Parts Flat 3.2mm Thick[Press Fastener/ Eyelet Washer] Morito

KH-HB

Top Parts Flat 3.2mm Thick

ApparelX ID:1081117

It is an item that can be widely used for casual wear such as down jackets and coats and sportswear. The thick flat shape gives a sharp impression.
Engraving on the side is also possible by special order.
*This product is only the top part, so please use it together with the 5BX, 6BX, 4301, 7401 or 7301 under parts from the related products.

Colors other than standard colors can be made to order.
Production lot: 5
【important point】

!

Please purchase separately because a special snap fastener installation tool press machine is required for installation. Please refer to the related product page.

Maker:Morito

Supplier:

MB

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

10MM

13MM

15MM

18MM

Color

Please select a color:

ABL

ASD

Matte Black Nickel

ASL

Matte Silver

HBK

MBO

PWP

YLO

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

It is an item that can be widely used for casual wear such as down jackets and coats and sportswear. The thick flat shape gives a sharp impression.
Engraving on the side is also possible by special order.
*This product is only the top part, so please use it together with the 5BX, 6BX, 4301, 7401 or 7301 under parts from the related products.

Colors other than standard colors can be made to order.
Production lot: 5
【important point】

!

Please purchase separately because a special snap fastener installation tool press machine is required for installation. Please refer to the related product page.

* Please choose the hook while paying attention to the thickness of the textile . If you hit it too hard, the spring will be deformed. Please use button seal for thin textile .

Category	Press Fastener/ Eyelet Washer
Subcategory	Press Fastener
Gender	Unisex
Use Applications	General Purpose
Material	Brass
Style	JACKET, OUTDOOR, OUTER, SPORT


Maker	Morito

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Which tool should I choose for Morito's press fastener and eyelet washer ?

Moritohand press NO.45 or hand press small NO.PM-1 .
Morito snap fastener installation tool be used in both.

Can I repair or replace the beaten pieces?

Since the hammer is a consumable item, basically we do not accept repairs or replacements due to deterioration or damage of the elastic band due to aged deterioration other than initial defects.
I'm very sorry, but I would like to request a replacement.
*In order to delay the deterioration of the elastic band over time and make it last longer, immediately return it to the bag and box in which it was used after use.

Where should I put the eyelet washer button seal?

It will be between the washer and the cloth

Is button seal necessary for press fastener and eyelet washer ?

In the case of thin textile , we recommend using button seal to prevent the textile from tearing or falling out while repeatedly putting on and taking off.
In the case of thick textile such as leather, it may not be possible to enter and hit, so please check the sample before considering.

KH-HB Top Parts Flat 3.2mm Thick

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Item Description

FAQ

General Notes

Reviews

Related Items

Items checked by persons who checked this item

Items from the same category

Items from the same maker

KH-HB

Top Parts Flat 3.2mm Thick