ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

›
TQ3502

TQ3502 ET・CS Series <Highly Versatile Fusible Interlining>[Interfacing] Tohkai Thermo(Thermo)

TQ3502

ET・CS Series

Name: ET・CS Series
Brand: Tohkai Thermo(Thermo)
SKU: 1024201

ApparelX ID:1024201

It has a moderate degree of compliance in the warp direction and adds tension in the weft direction.
※This product is sold by the roll only. When placing an order, please enter 60 in the quantity field.

Set the quantity for the roll

※1 roll is 60 m random length. The actual meterage will be notified at the time of shipment.

Brand / Manufacturer:Tohkai Thermo(Thermo)

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

134

Gray

Off White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

TQ-SAMPLE

Fusible Interlining TQ Series Sample Card

Product Description

Set the quantity for the roll

※1 roll is 60 m random length. The actual meterage will be notified at the time of shipment.

Pressing conditions
・Flat type

Temperature	125~145℃
Time	10〜15 seconds
Pressure	3.9〜11.8 (N/cm)

・Roller type

Temperature	125〜145℃
Time	10〜15 seconds
Pressure	15〜29(Kpa)

* Pressing conditions vary depending on the pressing machine, so we recommend test application each time.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Men's
Intended Use	General Purpose
Style	JACKET, OUTER


Specification	Thread thickness: Warp 30d, Weft Special 200d Coating: DP22p Industry weight: 52gsm Specification: 150cm x 60m random
Material	100% polyester
Handling	*Before production bonding, please confirm the appropriate bonding conditions on the same textile.
Brand / Manufacturer	Tohkai Thermo(Thermo)

Supplier's Pick

Featured comments from the supplier for this item.

Okura Shoji Co., Ltd. 櫻井

Supplier

Standard fusible interlining for a wide range of uses

29 May 2026

This is a standard fusible interlining used for a variety of accessory applications.
We also receive many requests from factories, and it is used for a wide range of applications, including sourcing by roll as well as sleeve cuff interlining, back vent interlining, side seam interlining, and more.
Because it is 150 cm wide, cutting efficiency during processing is good, making it suitable for projects where efficiency, such as reducing waste, is a consideration.
It is also shipped frequently and inventory is relatively stable, so it is an easy fusible interlining to propose for ongoing projects.

Details:

Functionality

Thickness

Size

1 found this helpful

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.