ApparelX is B2B e-commerce site for the apparel industry.

PZ-10 Resin Hook PLASMA10 Top Parts[Press Fastener/ Eyelet Washer] Morito

PZ-10

Resin Hook PLASMA10 Top Parts

ApparelX ID:1021279

It is the top part of the resin hook.
Because it is made of resin, it can be widely used for antistatic clothes, baby clothes, children's clothes, sportswear, casual wear, etc.
* Colors are available in matte finish and glossy finish. If you want a glossy finish, choose a color that starts with G.
* Because it is a resin product, please be careful not to iron it directly.
* This product is only top parts, so please use it together with under parts from related products.
* For out-of-stock colors, we will arrange from 20,000 lots.
* Please note that two top parts are required for each set of under parts.

【important point】

A dedicated snap fastener installation tool press is required for installation, so please purchase separately. Please refer to the related product page

Maker:Morito

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

11.5MM

13MM

15MM

Color

Please select a color:

11083

Off White

11885

White

14080

16280

18140

20082

20101

20490

20530

22046

22106

22116

27010

28220

33000

Black

41391

41401

43117

43137

43147

44404

48582

55522

62313

62523

65270

66393

66403

71710

72550

72560

73640

77642

81291

81301

83124

Dark Blue

83794

88973

88983

91201

G11083

G11885

White

G16280

G20101

G20490

G20530

G22106

G22116

G33000

Black

G41391

G41401

G43137

G43147

G44404

G55522

G62313

G62523

G65270

G66403

G72560

G73640

G77642

G81301

G83124

Dark Blue

G83794

G88973

G88983

G91201

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

A dedicated snap fastener installation tool press is required for installation, so please purchase separately. Please refer to the related product page

* The unit price will change for orders of 200 or more.

Category	Press Fastener/ Eyelet Washer
Subcategory	Press Fastener
Gender	unisex
Use Applications	General Purpose
Style	KIDS, SHIRT, SPORT


Maker	Morito

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Please tell me the button seal to use for Plasma 10 eyelet .

A 9 x 2.8 mm size polyethylene button seal is recommended.

Which tool should I choose for Morito's press fastener and eyelet washer ?

Moritohand press NO.45 or hand press small NO.PM-1 .
Morito snap fastener installation tool be used in both.

Can I repair or replace the beaten pieces?

Since the hammer is a consumable item, basically we do not accept repairs or replacements due to deterioration or damage of the elastic band due to aged deterioration other than initial defects.
I'm very sorry, but I would like to request a replacement.
*In order to delay the deterioration of the elastic band over time and make it last longer, immediately return it to the bag and box in which it was used after use.

Where should I put the eyelet washer button seal?

It will be between the washer and the cloth

Is button seal necessary for press fastener and eyelet washer ?

In the case of thin textile , we recommend using button seal to prevent the textile from tearing or falling out while repeatedly putting on and taking off.
In the case of thick textile such as leather, it may not be possible to enter and hit, so please check the sample before considering.