ApparelX is a global B2B marketplace for fabrics and apparel materials.

OMU5000 General-purpose Interfacing For Heavy Garments 50D Nittobo Advantex

OMU5000

General-purpose Interfacing For Heavy Garments 50D

ApparelX ID:1020432

Wide-width general-purpose stretch interfacing
ON45 gives a slightly firmer, more menswear-like finish.

1. Vertical and horizontal stretch properties make it suitable for a wide range of materials and specifications.
2. Double dots provide stable adhesive strength and dry-cleaning durability. It also has washing durability.
3. It is designed in a 152 cm-wide wide width. More efficient pattern layout is possible, delivering excellent cost performance.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Standard bonding conditions
・Flat type

Temperature	140~150℃
Time	10〜15 sec
Pressure (gauge pressure)	2.0〜3.0 x 10-²MPa(0.2〜0.3kgf/cm²)

・Roller type

Temperature	120~140℃
Time	10〜12 sec
Pressure (gauge pressure)	0.15〜0.3MPa(1.5〜3.0kgf/cm²)
Pressure (line pressure)	11.6~22.1N/cm

Suitable items: jackets, blousons, bottoms, and other heavy apparel items
Suitable materials: all materials from natural fibers to blended synthetic fibers; all medium- to heavyweight materials

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Men's
Intended Use	General Purpose
Weave	Stretch
Color / Pattern	Solid
Style	JACKET, PANT


Specification	Specification: 152 cm × 50 m
Material	100% polyester E
Handling	Suitable items: All heavy apparel materials such as jackets, blousons, and bottoms Suitable materials: All materials from natural fibers to blended synthetic fibers; all medium-thick to thick materials
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

OMU5000 General-purpose Interfacing For Heavy Garments 50D

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Order Sample Book

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

OMU5000

General-purpose Interfacing For Heavy Garments 50D