ApparelX is a global B2B marketplace for fabrics and apparel materials.

EX100 3M™ Thinsulate™ Ex-Soft 100g/m2[Interfacing]

EX100

3M™ Thinsulate™ Ex-Soft 100g/m2

ApparelX ID:1015086

From sportswear to fashionable wear, it delivers comfortable warmth and style.
※ If ordering by the roll, enter 50 as the quantity.

Set quantity for roll

※ About the sample card
If you order a sample card for this product, we will send you a product swatch.

Brand / Manufacturer:

Supplier:

Thinsulate

Size:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

152CM

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

From sportswear to fashionable wear, it delivers comfortable warmth and style.
※ If ordering by the roll, enter 50 as the quantity.

Set quantity for roll

※ About the sample card
If you order a sample card for this product, we will send you a product swatch.

Features
1. Compared with standard quilt batting, it is 20–30%* lighter while delivering the same level of warmth, providing a light and warm comfortable feel.*
2. Pursuing an unprecedented soft texture and improved drape, it delivers an even better fit for a wide range of styles, from fashion wear to sportswear.
3. It can be used with panel stitching, enabling a wide range of design options. (Recommended panel size: 30cm × 45cm)
4. It is washable by water washing or petroleum-based dry cleaning.

*Based on 3M test data

Product number	EX30	EX40	EX60	EX80	EX100	EX120
Item name	3M™ Thinsulate™ Ex-Soft 30g/m2	3M™ Thinsulate™ Ex-Soft 40g/m2	3M™ Thinsulate™ Ex-Soft 60g/m2	3M™ Thinsulate™ Ex-Soft 80g/m2	3M™ Thinsulate™ Ex-Soft 100g/m2	3M™ Thinsulate™ Ex-Soft 120g/m2
Thumbnail
Order of thinness	1	2	3	4	5	6
Thickness	Thin	Thin	Thin	Medium	Slightly thick	Thick
Industry weight	30g/m2	40g/m2	60g/m2	80g/m2	100g/m2	120g/m2

* Horizontal scrolling is possible.

* The above information is for reference only. Please confirm the actual product before use.

Category	Interfacing
Subcategory	Quilt Batting
Gender	Unisex
Intended Use	Outerwear
Collection	Thinsulate


Specification	Specification: 152cm × 50m Industry weight: 100gsm Color: Off White
Material	100% polyester E

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.