ApparelX is a global B2B marketplace for fabrics and apparel materials.

Add or change items after you order Details

New: material suggestions from a garment photo Details

Change your order’s shipping address, even abroad Details

Product search upgraded: now also finds similar meanings and spelling variants Details

Welcome to ApparelX. We ship to the UK: DHL delivers in 2–5 days after dispatch.Delivery, VAT and duties

›
7700-BT

7700-BT

7700 High-density Taffeta Flat Bias Tape

ApparelX ID:1109883

There are no reviews yet.

This product has been processed into bias tape.
It is woven at high density with 50 denier yarn.
By applying a ciré finish to the back side, it gains a subtle sheen on the surface, and becomes polyester taffeta with a light, soft feel.
It can be used for a wide range of applications, including outerwear and sportswear.
*This product is an alternative product / substitute product for 6700-BT.

This product can be ordered by the roll. (1 roll = approx. 70 m)

Set roll quantity

Because the product is supplied in random-length 70 m rolls, if the length is less than the stated amount, we will refund the amount corresponding to the shortfall. If it is more, we will charge for the additional amount. In that case, we will contact you separately.

Brand / Manufacturer:STAR BRAND (Hoshika)

Supplier:Okura Shoji Co., Ltd.

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Item

Size

Please select a size:

10mm

11mm

12mm

13mm

14mm

15mm

16mm

17mm

18mm

19mm

20mm

21mm

22mm

23mm

24mm

25mm

26mm

27mm

28mm

29mm

30mm

31mm

32mm

33mm

34mm

35mm

36mm

37mm

38mm

39mm

40mm

41mm

42mm

43mm

44mm

45mm

46mm

47mm

48mm

49mm

50mm

Color

Please select a color:

White

Canary

Yellow

Orange

Pink

Purple

Eggplant Navy

Red Purple

Crimson

Deep Red

Wine

Deep Green

Navy Blue

Lapis Navy

Midnight

Cream

Light Rikyu

Gray

Dull Olive

Dark Beige

Tan

Deep Brown

Dull Gray

Dull Green

Dark Olive

Dark Brown

Dark Chocolate

Dark Green

Dark Gray

Charcoal Gray

Off-White

Black

Cocoa

Wisteria

Marigold

Retro Gray

Blue Gray

Blue

Silver Gray

Cobalt Blue

Light Brown

Green

Ivory

Deep Orange

Dark Gray

Olive

Brown Khaki

Caramel

Order Memo

Add a note for the supplier or for your own reference:

Enter Memo

Order Sample Book

Order a sample book here:

*Note: The sample book below will be added to your cart. If you do not need it, remove it on the Cart page. Its memo is pre-filled with the item code and name from this page.

STARBRAND-SAMPLE1

STAR BRAND Sample Card

Item Description

Set roll quantity

Category	Ribbons, Tapes, And Cords
Subcategory	Bias Tape
Gender	Unisex
Style	For Outerwear/blousons/coats, For Pants, Outdoor, For Uniforms/Workwear, For Bags


Country of Origin	Japan
Specification	Construction: 50D x 50D, 274 threads Dyeing: piece dyed, 48 color variations
Material	100% polyester E
Brand / Manufacturer	STAR BRAND (Hoshika)
Listed on ApparelX	05/06/2026

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching fabric, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.

General Notes

Please confirm the following general notes regarding items at this site:

Zippers | Payment When Delivery Time Is Prioritized

We may shorten a longer zipper to the length you need. In that case, the unit price may change.

*** For bank transfers, please pay after the unit price is confirmed.

*** For credit card payments, please make an additional payment after the unit price is confirmed.

About Item Images

Screens cannot reproduce the actual texture or sheen of fabrics and other items, and colors may look slightly different depending on your monitor. We are working toward a world where physical sample books are no longer needed, but for bulk production orders we recommend purchasing a sample book to check the actual item.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, we will refund the difference or ask for an additional payment after the final length is confirmed.

Need help? Visit our Support page