ApparelX is a global B2B marketplace for fabrics and apparel materials.

NP-PR Cap Snap Button Shank[Press Fasteners And Eyelet Washers] Morito (MORITO)

NP-PR

Cap Snap Button Shank

ApparelX ID:1019935

This product is scheduled to be discontinued. Once the current stock runs out, there is a possibility that we will not do additional production.

If you would like to order, please inquire about stock here before placing your order.
The alternative product / substitute product is W2 JEANS RIVET
Rivet leg (W2-11/O (11mm))

Please use this.
This is a leg used together with the cap snap button top (product numbers: NP-1, NP-GHQ).
By sandwiching the top and leg between the textile and driving it in with a hammer or similar tool, it can be securely attached to the textile.

Brand / Manufacturer:Morito (MORITO)

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

Color

Please select a color:

PWP/YLO

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

This product is scheduled to be discontinued. Once the current stock runs out, there is a possibility that we will not do additional production.

If you would like to order, please inquire about stock here before placing your order.
The alternative product / substitute product is W2 JEANS RIVET
Rivet leg (W2-11/O (11mm))

The color is available only in the single color shown in the photo, PWP/YLO.

※ Prices are lower when you purchase 100 or more.

*This product is the leg for the cap snap button, so please be sure to purchase the cap snap button top as a set.
Please see the related products below. (Product numbers: NP-1, NP-GHQ)

Category	Press Fasteners And Eyelet Washers
Subcategory	Press Fastener
Gender	Unisex
Intended Use	General Purpose
Tag	Scheduled To Be Discontinued Item


Brand / Manufacturer	Morito (MORITO)

Share This Item

FAQ

Frequently asked questions about this product:

How to Repair MORITO Koma (Retightening the Internal Bolt / Video Available)

If the center part of the ferrule has lifted,
the internal bolt may be loose.
In some cases, tightening it again with a hex wrench can fix the issue.
Please refer to the video at the attached URL for detailed instructions.
https://www.apparelx.jp/videos/IMG_0765.mp4

Which punching tool should I choose for Morito press fastener and eyelet washer snap fastener installation tools?

Morito's Hand Press NO.45 or Hand Press Small NO.PM-1. Both can be used with Morito's snap fastener installation tool.

Can the striker be repaired or replaced?

The die is a consumable item, so except for initial defects, we generally do not accept repairs or replacements for deterioration or damage to the elastic band due to aging.
We apologize for the inconvenience, but we ask that you purchase a replacement.
*To slow the deterioration of the elastic band over time and extend its lifespan, please return the die to the bag and box it came in immediately after use.

Where should I insert the button seal for the eyelet washer?

It goes between the washer and the fabric.

Do press fasteners and eyelet washers require button seals?

For thin textile, we recommend using a button seal, as it helps prevent the textile from tearing after repeated attachment and removal, and reduces the risk of it coming loose.
For thick textile such as leather, it may not fit and may not be able to be fastened, so please check with a sample before considering it.

NP-PR Cap Snap Button Shank

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

NP-PR

Cap Snap Button Shank